A simple,rapid and sensitive method based on modified multiwalled carbon nanotube for preconcentration and determination of lead ions in aqueous media in natural pHs

In this study, multiwalled carbon nanotube (MWCNT) was modified by the pyridine group using a silane agent and characterized by infrared spectroscopy (IR), thermal analysis (TG/DTA), and elemental analysis (CHN) and scanning electron microscopy (SEM). The application of this sorbent was investigated in determination of lead ions in aqueous samples, using flame atomic absorption spectrometry (FAAS). Through this study, different parameters such as pH and sample flow rate on adsorption process and eluent concentration, volume and flow rate were optimized. The limit of detection (LOD), the relative standard deviation and the recovery of the method were 2 ng mL^?1, 1.3% and 99.7%, respectively. Two standard reference materials (NIST 1571 and NIST 1572) were used to verify accuracy of this method. Finally, the sorbent was successfully applied for extraction and determination of low levels of Pb(II) ions in aqueous samples.     

Strong π-π stacking interactions led to the mis-assignment of dimer emissions to the monomers of 1-acetylpyrene

Both experimental and computational studies showed owing to strong π-π stacking interactions, 1-acetylpyrene mainly exists in dimers and molecular aggregates even at low concentrations, which led to the mis-assignment of its monomer emission peaks.     

Cyclohexane‐1,3‐dione as a derivatizing agent for the analysis of aldehydes by micelar electrokinetic chromatography with diode array detection

Aldehydes are important compounds in a large number of samples, especially food and beverages. In this work, for the first time, cyclohexane‐1,3‐dione (CHD) was used as a derivatizing reagent aiming aldehyde (formaldehyde, acetaldehyde, propionaldehyde, and valeraldehyde) analysis by MEKC‐DAD. The optimized separation of the derivates was performed using a voltage program (+20 kV, 0–15 min.; +23 kV, 15–17 min.) at a temperature of 26°C, and using as the running buffer a mixture containing 100 mmol/L of sodium dodecyl sulfate and 29 mmol/L of sodium tetraborate at pH 9.2, with maximum absorbance at 260 nm. CHD was compared with two other derivatizing agents: 3‐methyl‐2‐benzothiazolinone hydrazone and phenylhydrazine‐4‐sulfonic acid. The CHD‐aldehyde derivatives were also characterized by LC‐MS. The calibration curves for all aldehydes had r² above 0.999 and LODs ranged from 0.01 to 0.7 mg/L. The optimized methodology was applied in sugar cane brandy (cachaça) samples successfully. CHD showed to be an alternative derivatization reagent due to its stability, aqueous solubility, high selectivity and sensitivity, reduced impurities, and simple preparation steps.     

MALDI MSI Reveals the Spatial Distribution of Protein Markers in Tracheobronchial Lymph Nodes and Lung of Pigs after Respiratory Infection

Respiratory infections are a real threat for humans, and therefore the pig model is of interest for studies. As one of a case for studies, Actinobacillus pleuropneumoniae (APP) caused infections and still worries many pig breeders around the world. To better understand the influence of pathogenic effect of APP on a respiratory system—lungs and tracheobronchial lymph nodes (TBLN), we aimed to employ matrix-assisted laser desorption/ionization time-of-flight mass spectrometry imaging (MALDI-TOF MSI). In this study, six pigs were intranasally infected by APP and two were used as non-infected control, and 48 cryosections have been obtained. MALDI-TOF MSI and immunohistochemistry (IHC) were used to study spatial distribution of infectious markers, especially interleukins, in cryosections of porcine tissues of lungs (necrotic area, marginal zone) and tracheobronchial lymph nodes (TBLN) from pigs infected by APP. CD163, interleukin 1β (IL-1β) and a protegrin-4 precursor were successfully detected based on their tryptic fragments. CD163 and IL-1β were confirmed also by IHC. The protegrin-4 precursor was identified by MALDI-TOF/TOF directly on the tissue cryosections. CD163, IL-1β and protegrin-4 precursor were all significantly (p < 0.001) more expressed in necrotic areas of lungs infected by APP than in marginal zone, TBLN and in control lungs.     

An Approach to Paracyclophane-Based Tetrathiafulvalenes: Synthesis and Characterization of a Pseudo-Geminal [2.2]Paracyclophane 1,3-Dithia-2-Thione

The synthesis of paracyclophane-based tetrathiafulvalene precursors is described in the context of the importance of these compounds in the field of material chemistry. Pseudo-geminal bis(1,3-dithia-2-thione) was synthesized via the corresponding 1,3-dithiol-2-ylium salt. The latter was obtained by a synthetic procedure that involves 4,15-bis(acetyl)[2.2]paracyclophane, a new compound of interest for many researchers.     

Regularity and Rigidity for Nonlocal Curvatures in Conformal Geometry

In this paper, we will explore the geometric effects of conformally covariant operators and the induced nonlinear curvature equations in certain nonlocal nature. Mainly, we will prove some regularity and rigidity results for the distributional solutions to those equations.     

Fluorescent macrocyclic chemosensor for Zn(II) detection at alkaline pH values

ABSTRACT

The new macrocyclic ligand L (28,29-dimethoxy-27-oxa-8,11,14,17,25,26-hexaazatetracyclo[22.2.1.1(2,6).1(19,23)]nonacosa-2,4,6(28),19,21,23(29),24,26(1)-octaene) has been synthesised. It contains a tetramine chain and the 2,5-bis(2-methoxy-3-metyl-phenyl)-1,3,4-oxadiazole (PPD-OMe) chromophore, acting as coordinating and sensing units, respectively.

The fluorescent emission of L depends on the pH being highly fluorescent at pH = 2 and not emitting from pH >10. The studies highlighted that L is a PET mediated emitting chemosensor, being the PET effect regulated by the degree of the tetraamine protonation.

L coordinates metal ions (Cu(II), Zn(II) and Cd(II)) in water giving rise to an OFF-ON fluorescent response for the presence of Zn(II) ion thus signalling its presence in the medium. This response is particularly notable at pH = 9 allowing to extend the Zn(II) sensing also in the alkaline pH field.     

Synthesis and characterization of VO–vanillin complex immobilized on MCM-41 and its facile catalytic application in the sulfoxidation reaction,and synthesis of 2,3-dihydroquinazolin-4(1H)-ones and disulfides in green media

In this work, a vanillin complex is immobilized onto MCM-41 and characterized by FT-IR, X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, and BET techniques. This supported Schiff base complex was found to be an efficient and recoverable catalyst for the chemoselective oxidation of sulfides into sulfoxides and thiols into their corresponding disulfides (using hydrogen peroxide as a green oxidant) and also a suitable catalyst for the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives in water at 90°C. Using this protocol, we show that a variety of disulfides, sulfoxides, and 2,3-dihydroquinazolin-4(1H)-one derivatives can be synthesized in green conditions. The catalyst can be recovered and recycled for further reactions without appreciable loss of catalytic performance.     

Theoretical studies of photovoltaic properties of five new silol dithiophene based D2-A-D1-A-D2 donors

Organic solar cell of silol dithiophene based D₂-A-D₁-A-D₂/PC₇₁BM (D: donor part; A: acceptor part; 1 and 2 denote different units) possesses promising power conversion efficiency. Researchers have studied D₂-A-D₁-A-D₂ molecules carefully, including the effects of the different number of terminal thiophenes, the different central moiety (D₁), and the length of the alkyl chain. However, there are few investigations, especially theoretical studies, on the influences of different A (acceptor) units on the properties of D₂-A-D₁-A-D₂ molecule. In the present work, we have designed and modeled five new D₂-A-D₁-A-D₂ (D₂ = bithiophene and D₁ = silol dithiophene) donors by changing A units (A = diketopyrrolopyrrole, naphtho[1,2-c:5,6-c′]bis[1,2,5]thiadiazole, 5-fluoro-2,1,3-benzoselenadiazole, benzobisthiadiazole, and thiazolo[5,4-d]thiazole). We have applied density functional theory (DFT) and time-dependent DFT to predict their ground-state electronic structures and the UV–vis spectra, and the open circuit voltages (Vocs) of organic solar cells of D₂-A-D₁-A-D₂/PC₇₁BM. Based on the calculated results, we find that bithiophene thiazolo[5,4-d]thiazole siloldithiophene (BTTS) (D₂ = bithiophene, A = thiazolo[5,4-d]thiazole, D₁ = silol dithiophene) possesses the highest lowest unoccupied molecular orbital (−2.60 eV) and the lowest highest occupied molecular orbital (−5.33 eV) energies, and the strongest absorption in the visible region. Besides, the solar cell of BTTS/PC₇₁BM has the highest Voc of 1.02 V. These results indicate that it may be a promising donor. In contrast, bithiophene benzobisthiadiazole siloldithiophene (BBBS) (A = benzobisthiadiazole) has low absorption strength in the visible region, which indicates that it may not be a suitable donor material.